CanPFN Intramedullary Nail Instrument
Characteristics of The Products
The locking screw concept was produced by Dr. Tepic S and Dr. Perren SM for the first time in 1995. With locking compression plate put in use, it became one of the most important developments for plate and screw internal fixation in recent years. Locking screws provide the ability to create a fixed-angle construct while utilizing familiar conventional plating techniques. The fixed-angle construct function like a internal fixators which maintain primary and secondary loss of reduction. This kind construct also provides improved fixation in osteopenic bone or multifragment fractures where traditional screw purchase is compromised. LCP constructs do not relγ on plate-to-bone compression to maintain stability. Therefore, the periosteum will be protected and the blood supply to the bone preserved.
| Product Name | Medical devices Instruments sets of Proximal Femoral Intramedullary Nail |
| Material | The CanPFN are made of stainless steel |
| Color | Customized |
| Standard | ISO 13485,ISO9001,QSR820,CE |
| Features & Benefits | --Two functions achieved : anti-rotation and stable fixation --Two interlocking options: a. Helical blade: fill interspace to reduce bone loss. b. Lag screw: offer better compression locking effect --Long nail tip and flutes design to prevent stress concentration - Medial-lateral angle of 5°. --Inner thread design on the end of the nail makes easier for nail extracting. --End cap with different heights. |
| P.N | Description | Qty. |
| 114400011 | Hexagonal Solid Screwdriver Length 248mm | 1 |
| 115400001 | Insertion Handle | 1 |
| 115400002 | Proximal Aiming Arm | 1 |
| 115400003 | Buttress Nut for Proximal Aiming Arm | 2 |
| 115400004 | Protection Sleeve for distal locking | 2 |
| 115400005 | Obturator for Distal Locking | 2 |
| 115400006 | Trocar for Distal Locking | 1 |
| 115400007 | Compression Nut | 1 |
| 115400008 | Protection Sleeve for blade | 1 |
| 115400009 | Protection Sleeve for lag screw | 1 |
| 115400010 | Obturator for Blade | 1 |
| 115400011 | Obturator for Lag Screw | 1 |
| 115400012 | Protection Sleeve for lag screw | 1 |
| 115400013 | Trocar | 1 |
| 115400014 | Connecting Nut | 1 |
| 115400015 | Aiming Arm for distal locking | 1 |
| 115400055 | Distal Aiming Connecting Shaft | 1 |
| 115400056 | Distal Targeting Device for Long Nail | 1 |
| 115400057 | Targeting Device Nut for Long Nail | 1 |
| 115400058 | Distal Outrigger | 1 |
| 115400059 | Distal Outrigger Nut for Long Nail | 1 |
| 115400060 | U-shaped Stabilizing Spacer | 1 |
| 115400061 | Location Shaft | 1 |
| 115400062 | Location Sleeve | 1 |
| 115400063 | Handle Connecting Nut | 1 |
| 115400016 | Universal Chunk with T-Handle | 1 |
| 115400017 | Radiographic Ruler | 1 |
| 115400018 | Protection Sleeve | 1 |
| 115400019 | Drill Sleeve | 1 |
| 115400020 | Ø5.2Protection Drill Sleeve | 1 |
| 115400021 | Temporary End Cap for the lag screw | 1 |
| 115400022 | Obturator | 1 |
| 115400023 | Ø5.2Drill Bit | 1 |
| 115400024 | Flat Drill with T-Handle | 1 |
| 115400025 | Proximal Reamer | 1 |
| 115400027 | Awl | 1 |
| 115400029 | Impactor | 1 |
| 115400030 | Quick Connection T-Handle | 1 |
| 115400031 | Ratchet Wrench for Nut, hexagonal | 1 |
| 115400032 | Slotted Hammer | 1 |
| 115400033 | Guide Wire Ø3.2×400 | 5 |
| 115400034 | Depth Gauge for Guide Wire Ø3.2 | 1 |
| 115400035 | Cannulated Drill Bit for cortex boneØ10.6/Ø3.2 | 1 |
| 115400036 | Cannulated Drill Bit with limitØ10.6/Ø3.2 | 1 |
| 115400037 | Fixation Sleeve SW4.5/φ3.2 | 1 |
| 115400038 | Screwdriver for PFN Blade | 1 |
| 115400039 | Extractor Connection shaft for blade | 1 |
| 115400040 | Counter-torque Wrench for blade | 1 |
| 115400041 | φ4.3 Drill Bitφ4.3/300mm | 3 |
| 115400043 | Pin Wrench SW3/SW5 | 1 |
| 115400044 | Depth Gauge for Locking screw | 1 |
| 115400045 | Screwdriver,hexagonal SW3.5 | 1 |
| 115400046 | Wrench with T-Handle | 1 |
| 115400047 | Extractor for Nail M8 | 1 |
| 115400048 | Guide Wire with Hook φ2.8 | 1 |
| 115400049 | Cannulated Screwdriver for end cap φ2.8/SW4/SW11 | 1 |
| 115400050 | Cannulated Wrench for end cap SW11 | 1 |
| 115400051 | Extractor for Blade SW4.5/φ3.2 | 1 |
| 115400052 | Cleaning Wire | 1 |
| 115400053 | Lag Screw Holding shaft | 1 |
| 115400054 | Wrench shaft for Lag Screw | 1 |
| 115403000 | Instrument Tray | 1 |
Q: Would you please give some information on shipping mode and charges?
A: Normally we send through courier, or post upon request from clients.
Q: Do you have ISO 9001, CE, or FDA approvals?
A: Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have FDA Registrations and CE mark for many of our products.
Q: What is the minimum order that we can place?
A: We expect your minimum orders to be least at US$1000. However, we understand that customers need to place smaller samples orders in the beginning in order to test market our products . Samples against cost are available on request.
Q: Can I buy products not shown but similar to your catalogue?
A: Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
Q: Do you have stock for listed products, or they are newly produced?
A: Generally, we have stock for every listed products, which were produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information.